The version 1. Remark The versions mentioned above are the first versions that support the according feature. As the versions all are backward compatible, it is recommended using the last version rather than downgrading a system to the version indicated above. Grund Die Stationen werden nur gespeichert, nach einem Timeout von 2 Minuten ms oder wenn die SWebConnect geschlossen wird, bevor Sie zuschlagen unten die Leiste.
Dies kann in der Datei SWebconnect. D5xxx verwendet eine Menge Ressourcen. Das Panel ist gesperrt! Wenn der Bootloader aktualisiert ist, schalten Sie das Bedienfeld. S-Web-Anwendungen, erstellt mit Web-Editor 5. Andernfalls werden die Web-Editor 5. D5xxx Web-Panel z. Starten des Betriebssystems die Programme in einer Sequenz, die nicht vorhersehbar ist: Es kommt auf den Speicherort der Datei innerhalb des Dateisystems. Es ich Favoritengruppe empfohlen nicht angewiesen auf eine alphanumerische bestellen!
Bearbeiten der Datei startup. Dies kann mit den folgenden Schritten erfolgen:. Stellen Sie sicher, dass Sie wirklich alle Dateien kopieren auch die versteckten Systemdateien etc.. Speicherung von Logfiles. Das bedeutet, die jetzt die Bildlaufleiste auf der rechten Seite und auf der Unterseite des Bildschirms sichtbar ist [autotranslated].
Wenn Sie ein neues Projekt erstellen, empfehlen wir den 2-Kioskmodus verwenden. Englisch Deutsch. Manual PCD7. Neuste Micro Browser Versionen neuer als diejenigen der obenstehenden Images.
Achtung: 1. The PCD firmware can be downloaded from the according product section on the support site. The firmware of an MB Panels if used. D4xx from the support site. The image if a CE- or eXP panel is used. The according image can be downloaded from the product section PCD7. D6xxx eXP from the support site. In the IMasterSaiaxxx. The IMasterSaiaxxx. The Web Editor itself can be downloaded from the Application overview page "S-Web" on the support site.
New Web-Editor 5. D4xxx mit FW 1. D4xxV mit FW 1. D5xx mit MB Version 1. Sysadmin, Remoteadmin etc. Statt der SBC. Auf die PCD7. Wordpad, die auf jedem PCD7. D5xxx und PCD7. Der neue Benutzer wird unterhalb der standard "Administrator" angezeigt. Das Semikolon ist wichtig. D5xxx [autotranslated]. JVM required intern. JVM required Multi line painter 5. R-CF[autotranslated] [autotranslated].
Das Programm wird gestartet, aber die Batch-Verarbeitung nicht Beendigung warten. MB Panels FW version. Win CE Panel uBrowser. Win Mobile uBrowser.
Autoscaling up-scaling. Polygon rotate feature. New macro dialogs new TEQ file format "h". Online trend with correct time. Web-Editor functions. Web Server 2. HD Log trending to file system. Online trend on MB Panels with correct time. It is reset to 0 on any mouse or key actions of the user. Persistent container 0 stored in "uBrowsCo. Persistent container 1 stored in "uBrowsCo. Persistent container 2 stored in "uBrowsCo. Persistent container 19 stored in "uBrowsCo. Web Editor.
Web-Editor MB version. New PG5 Symbol selector with group support. New Macro format incl. New Alarming macros for 3. Browser resp. Alarming with extension for ACK by user program. Support of Unicode character set only for the display of texts in the browser by the use of "HTML tags". JVM required. Multi line painter. Web-Editor zooming. On the Webpanel, the application works well. Other PC's should connect to the webapplication through this Webpanel.
The Website is displayed correctly but there is an error message: cgi order values failed and instead of the PPO values there is "No Message" displayed in every variable field. Solution The CE panel is connected over Webconnect. If a PC wants to connect to the webapplication over this Webpanel, you have to type not only the IP address but as well the Webconncet connection name and the name of the startpage: Open the web-browser on the remote PC and type the IP address of the CE web-panel, the connection name defined on the web-connect software and the name of the startpage in the navigation bar of the browser.
Example: The procedure is the same. The Microbrowser VGA panel doesn't support this functionality at the moment; but it's planned for the future.
In some situations it might be useful creating an own desktop icon onto the desktop of CE panels PCD7. Background The contents of the desktop, e. All elements stored in this directory appear on the desktop. So if you switch off the panel, the shortcut is lost.
Creating a persistent shortcut Creating a persistent shortcut is done in three steps:. After booting the panel, the shortcut to the WebConnect appears on the Desktop make sure that you do not start the WebConnect twice; to check whetere it is running.
In the internal RAM the operating system and applications are executed. Thus after power-on, the panel boots and starts Windows CE from scratch. Finally the operating system runs in the internal RAM. There is a specialised folder called "Network" which makes all available network connections accessible. In today's Windows CE devices you will only find RAM for executing the operating system or applications and flash memory for persistent storing the Windows CE operating system, user installed software applications and user data.
The Windows CE memory management is based on a virtual memory concept. In total a flat 32 bits address space of 4 GB is accessible. As with all virtual memory concepts, the complete address space is normally not covered with real memory. The memory management of the operating system translates the address space to the real equipped memory of the device, which is much smaller in size.
This functionality easies software engineering and allows a more efficient use of the memory. For applications, only the lower 2 GB oft the total address space are available. The upper 2 GB are used by the operating system itself. Also the lower 2 GB applications part is divided into 2 sections: the shared memory and the slot section. The shared memory is mainly used for storing memory-mapped files like the operating system files after boot-up.
The slot section is divided into 33 slots of 32 MB each. Applications or process which are executing, get one slot for program and data space. In total, Windows CE can run 32 applications simultaneously. Slot 0 has a special meaning: here resides the actual executed process.
If a process becomes active, its slot is mapped to the slot 0 address space and executed. Also the maximum slot size is 32 MB, applications with less memory requirements do not waste unused memory; the operating system maps only the necessary memory to the application slot and saves this way memory for other applications.
If necessary, an application can be broken down to 2 processes, occupying 2 slots. But this makes referencing and managing variables complicate and slow.
Also using the shared memory does not replace proper stack and heap structures in the assigned single slot. Basically there are two big memory sections: storage memory and program memory. Storage memory describes more or less the shared memory part of internal RAM. Program memory describes the part of the internal memory where the slots 0 to 32 for applications are mapped. After opening the control panel windows Start-Settings-Control Panel , the "System" icon can be selected.
In the "System Properties" window, there is a "Memory" tab. The blue bar represents the current available RAM. It is possible to synchronize the time on a CE-panel with a timeserver. Additionally it is possible to transfer this time to the PCD. Synchronization with a timeserver To synchronize the panel with a timeserver, connect to the panel with the "Remote Admin".
The password is "admin":. The timeserver in this example is the timeserver from ETH Zurich. It works well for Switzerland. If you are in another time zone, you can search another timeserver on the internet. Flag 10 default will give the impulse and the send interval is seconds. Please see the online help of the tool which gets displayed if it gets started without any parameters.
Or see attached file. Yes, since the S-Web editor 5. Since the S-Web editor version 5. The information's are stored in to special "session containers". Any new launched browser will generate a new session and will have here own session containers. The option "File New Tab" or "File New Window" of the browser will not make a new session and therefore the "old" session containers will be used on those windows.
If he now do connect to the PCD "B" and do load the web application of the PCD "B" then the password level should be used directly on the web application of the PCD "B" whiteout that the user needs to reenter the password. In the past years several different types of Windows bases have been sold.
This FAQ contains a complete list of all sold panels. Remark In some cases it might be possible that only the Lauer product code is visible on the panel. Therefore the relevant Lauer code is also listed above.
It's possible to extend the lifetime of the illumination by switching off the backlight during periods of inactivity. Background The display of the web panels is illuminated with a backlight. The lifetime of the backlight is limited.
Windows CE offers build-in functions to switch off the backlight after a period of time without touching the screen. In details this means, if the screen is not touched within a predefined time, the backlight is switched off and the screen turns to dark. To reactivate the illumination you only need to touch the screen once again; then immediately the backlight is switched on once again.
Activating the automatic switch-off function of the backlight. This will not work! D5xxx is launched, it prompts for the start page to be opened. But if the checkbox "ask me again" once has been unchecked, there is no more prompt when the uBrowser software is lauched.
This FAQ explains how to modify the start page in this case. The start page to be loaded by the uBrowser together with the configuration wheter the prompt on start-up of the uBrowser shall be shown is written in the file "uBrowser. Procedure for modifying the start page of the uBrowser. Remark In the same file, you can also configure wheter the prompt on start-up shall be shown or not. D5xxx with the default user "admin". In case this user has to be changed for security reasons, read this FAQ.
Summary On PCD7. D5xxx the default user to access the administration web pages e. Sysadmin, Webadmin, Remoteadmin is "admin", and the password is also "admin". Also it is very handy to have one user with an easy password, it might be required to modify this account for security reasons. How to modify the password of the user "admin"? The password of the user "admin" can be changed over the interface "Remoteadmin". In order to access this interface, follow the following steps:.
Remark Please note that SBC can not reset your password once you have modified it. However, in every case restoring the image of the CE Panel will allow re-configuring it with the default user.
This 'ExeButton' allows launching an application on the web panel by means of a button. This way it's for instance possible to access programs or run batchfiles beside the visualisation. Type of the application Console application Download from here Name: exebutton. Launch "ExeButton. Copy the tool 'ExeButton. For automatic start of the action of the button, add following line in the 'StartUp. With these container variables you can control the behaviour of the Micro-Browser, get panel specific information, launch and control applications which run in parallel to the Micro-Browser, control hardware features e.
D5xxxTXxxx doesn't support audio. Version 2. More recent versions of the image are bigger than 64MB and require therefore in minimum MB cards.
Everybody knows that the login to access the Storage card of the Windows CE Panel is "admin" for the user name and "admin" for the password. This login can be customized. The following procedure uses these interface for modifying the users for that it is no longer possible reading the FAQs for "hacking" your CE Panel :. The gaps can occur if the displayed time range on the browser is bigger than the data logging ringbuffer on the PCD.
Example The log date size is KByte data with a frequency of 1 log per seconds. As 1 KB is bytes, there are bytes x bytes available for the trend. At All data's from No recorded data is available between 8 and 8. Note If the browser is restarted or if a "clear Log" is exectuted then the gap disappaers because the temporary memory of the browser is cleared and trend shows only the last data's 3h Yes, it is possible to store the web pages. In general it is possible storing data pictures, files directly on the Web Panel.
The only file which always needs to be stored on the PCD is the file with the extension tcr. Depending on the panel, specific techniques and storage folders are available: Micorbrowser Panel PCD7. In this case, data can be stored on the storage card in the Webpage folder the folder location can be configured in WebConnect.
Hint: whenever possible, use the http direct protocol, where WebConnect 2. In order to increase this duration, the backlight can be switched off with the screen saver functionality of the panel. You can place the macro on a background page and use the same background page on all your Web-Pages. Please note that you have to insert the macro directly on this three pages. To enter e value in to an edit field it's possible to use only a numeric keyboard instead of the alphanumeric keyboard.
With the menu point: Project, add to project, file. The file keypad. As soon as the MB-Display knows the status of the flag the condition of the comparison is checked and the depending of the result, the painter does hide the painter or not. D4xx - CE-Panel if the Microbrowser is used.
This information can be found in various ways, e. Introduction On each PCD7. The only purpose of these files is the indication of the versions, they don't have any content and therefore have a size of 0. Procedure for newer images on the panel. Remark The content of the folder "Version" is not automatically updated in case a new version of the uBrowser is copied onto the panel. The information in this folder can therefore be different than the really used versions.
In versions up to uBrowser version 1. Instead of properly showhing the project, the error message similar to: "!!! Reason The reason for this problem is that the allocated "heap 2" memory is not sufficient. In this memory area all containers and HTML tags are stored and until version 1.
The version 1. Remark For performant panels like Celeron based ones, another workaround could be using the Appletviewer of the Internet Explorer. This workaround works because there is no limitations of the size of memory where the containers are stored if the applet is shown by e.
If a negative value for instance The zero is missing. A new microbrowser version is solving the issue. Solution Install the new Microbrowser 1. Ask the support team for the latest version. Replace the Microbrowser. D5xxx , it is also possible accessing the "SysAdmin" Web Interface of the panel. The only prerequisite for accessing this interface is an established IP connection to the panel.
There are some preconfigured web sites running on the panel which allow access the panel via a web interface. This is a very convenient way to configure a Web Panel with nothing else than a network connection to the panel and a PC with a browser on it. Administering a Web Panel with SysAdmin. One of the included service web sites is the "SysAdmin" site.
It gives you access to the following resources of the panel:. Please make sure that you have installed the latest os image version on the web panel. The web server interface listens on the port This has to be taken into cosideration for the URL and eventually installed firewalls. Open with a browser the SysAdmin web page of the Web Panel; e. The SysAdmin web site is password protected. A window opens and you have to type-in a user name and a password. There are two versions of the SysAdmin web pages available: a simple one and one using frames and hierarchical trees.
If you are using Microsoft Internet Explorer recommended , choose the appropriate link as of this writing, Firefox only supports the simple version.
Administering the Web Panel. Shows information about the panel like processor, memory, communication adapters, etc. Shows the actual processes and applications, running on the panel and allows control. With the "Kill" link you can terminate execution of a process or application. You can start an application. Type the complete path to the program you want to start into the "Launch process" field.
Start the application clicking on the "Execute" button. File System Choose "File Browser" from the page header. Gives access to the complete file system of the panel. In the left pane, you can select the folder within a hierarchical tree. In the right pane you can copy, delete and upload files and folders. Registry Choose "Registry Editor" from the page header.
Shows the registry of the panel and allows to modify it. Navigate in the the panel's registry in the left pane. You can create, modify and delete registry values and keys. Caution: Changing registry settings can lead to panel's malfunction or loss of communication and could require overwriting the operating system image. Be aware what you are doing!
By default, the smaller version is used. It is possible switching the keyboard during runtime, but after the next boot of the panel, the small keypad is enabled again. In order to configure the large keyboard to be always enabled, a specific registry entry is to be modified.
Symptom After each reboot of the CE Panel, the small keyboard is displayed for entering values. It does not help to change the selection of the keyboard; After the next power up the small keyboard is shown again. Reason This configuration is written in the registry of the CE Panel. In order to modify this behaviour, the registry is to be modified. This can be done by executing the following steps:.
If the alarm text is too long, the active alarms are not displayed at all only in Microbrowser CE versino 1. The "Microbrowser CE" version used is 1. Additionally, the alarm texts are rather long and maybe unicode characters are used. Reason The maximal length of an alarm line in the Microbrowser CE is bytes including invisible characters.
In case unicode characters are used, it is possible that the visible text can only be 43 characters. Until and including version 1.
Solution Shorten the alarm texts for that they fit in bytes. Since the first version of the Web Editor has been released there has been many functionalities added. This FAQ contains a function matrix that gives further information regarding the added functionalities and dependencies.
Remark The versions mentioned above are the first versions that support the according feature. As the versions all are backward compatible, it is recommended using the last version rather than downgrading a system to the version indicated above. Reason The stations are only saved after a timeout of 2 minutes ms or if SWebConnect is closed before shuting down the panel. Solution Close SWebConnect before shutting down the panel or make the timeout shorter p.
This can be done in the SWebconnect. When using the CE-Panel it's sometimes useful to detect if the user browses the websites with the MicroBrowser or with the Internet Explorer. If you browse with the Internet Explorer, these three variables get minus-values.
D5xxx uses a lot of resources. When loading complex Webpages it could get critical with the available resources. A PopUp Window appears with following message: "Java: insufficient memory".
The panel is blocked!! For the panels PCD7. D5xxxTXxxx equipped with a XScale processor there are two boot loaders available. Available from our support site over this link: www. You will then be guided through the installation process.
Once the boot loader is updated, switch off the panel.
0コメント